PDA

View Full Version : Dyno Results- Quite fast, but not enough

scuderia
01-30-2006, 10:46 PM
Today i had my first dyno at SCI Motorsports. Justin was pretty helpful and i sucked millions of information from him. We did 3 runs here is the results:

1st run: 176.23 whp 152.24 max torque
2nd run: Was lower so we skipped this
3rd run: 183.27 whp 157.24 max torque

We waited 10 min. for cool off between 2nd and 3rd runs.

Here is the list of mods on the car:
15% reduction pulley
JCW CAI
JCW 380.cc injectors
JCW spark plugs
Invidia Catback
JCW ECU Upgrade

Those figures are whp at 68.80F and 68.15F(last run) outside temperatures, 6% humidity. I am pretty impressed so far.

The only thing that holds off is the temperature, cooler air=more hp. So this will change the path of the mod list in the near future.

http://www.northamericanmotoring.com/gallery/data/500/dyno.jpg
weezer2282
01-31-2006, 12:11 AM
Nice! :thumbsup

Hmmm...so will you be adding a bigger intercooler now?

That's a nice, flat torque curve too.
scuderia
01-31-2006, 12:31 AM
well, for now i have to slow down, the supersprint header is on the way and when it is installed, will change the path for a little bit. Intercooler is a must, definetely, now i do understand Keith and why he is so interested in heat reduction overall. Putting an intercooler is pushing the envelope with Mini Service. BTW, they have a big share in this power increase. Thanks to Daniel again.
Will
01-31-2006, 11:06 AM
Where is this place at? I'd like to get a base line for the Docta :)
weezer2282
01-31-2006, 09:08 PM
Isn't it in the New Braunfels/San Marcos/Selma area? I'd like to get a baseline done too...well with just the Atla intake on. :cool:
scuderia
02-01-2006, 12:56 AM
no, it is on 1604 and Nach. whatever that road i can't pronounce is :D 210-377-0099 Justin
Will
02-03-2006, 11:10 AM
Greg we should try to do this next weekend or something, on a sat afternoon?
weezer2282
02-04-2006, 01:07 AM
Greg we should try to do this next weekend or something, on a sat afternoon?

After the mod/detail thing Saturday? Let's go! :thumbsup I can see how much power the torque converter is eating up. :p
weezer2282
02-04-2006, 01:09 AM
no, it is on 1604 and Nach. whatever that road i can't pronounce is :D 210-377-0099 Justin

Nacodoces? or something like that... ;)