PDA

View Full Version : Accessing Front Fogs

weezer2282
10-12-2007, 10:57 PM
I have one front fog light plastic mount bracket that cracked. It cracked at the edge where one of the metal clamp nuts is attached. I had the front bumper cover off a while ago doing something else and to look at it, but the screws were not accesible from the front. How do you get at these to remove the fog light and the bracket it is attached to?
k-huevo
10-13-2007, 04:15 AM
The wheel housing cover has to be removed to access those screws. You might try removing just the forward expanding rivets and pulling the housing cover back after taking off the wheel.
weezer2282
10-14-2007, 02:14 AM
The wheel housing cover has to be removed to access those screws. You might try removing just the forward expanding rivets and pulling the housing cover back after taking off the wheel.

Thanks. I will give that a try sometime. :thumbsup